Kia Cee'd: Fuses / Fuse/relay panel description

Multi fuse

If the multi fuse is blown, it must be removed as follows: 1. Turn off the engine. 2. Disconnect the negative battery cable. 3. Remove the fuse panel on the right side in the engine compartme ...

Inner fuse panel

Inside the fuse/relay panel covers, you can find the fuse/relay label describing fuse/relay name and capacity. ✽ NOTICE Not all fuse panel descriptions in this manual may be applicable to ...

Other information:

Kia Cee'd JD Service Manual: Heater & A/C Control Unit (DATC) Repair procedures
Self Diagnosis 1. Self-diagnosis process 2. How to read self-diagnostic code After the display the panel blinks three times every 0.5 second, the corresponding fault code blinks on the setup temperature display pan ...

Kia Cee'd JD Service Manual: Yaw-rate and Lateral G Sensor Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Pull the passenger seat towards the front till the end. 3. Disconnect the yaw rate & lateral G sensor connector ...